How crusher dust removal equipment works

2020-03-10

Home page

According to the closed hood and pipeline by the wind power will be dust into the bag type dust collector, dust in the hood cavity operation, coarse particles of dust are separated out into the bin, ultra-particulate dust with the vapor through the filter into clean 4 vapor, by the centrifugal fan into the air, and ultra-micro powder is dust bag blocked in the surface of the total area into dust cake and landing, to achieve the purpose of dust removal and cleaning.
Mining crusher dust removal equipment features.
1、The advantages of room back-blowing wind and single pulse gas generator dust removal equipment, enterprise volume to solve the wind, the system software friction resistance is small, dust removal efficiency of 99.9%.
2, can immediately solve the soot concentration value up to 200g/nm3 soot other, after solving the other discharge concentration value less than 10mg/nm3, can also be based on the unique requirements of customers, consider the strict discharge regulations.
1、The flow type design of the dust collector can open part of the hurricane effect and relieve the dust bag load. The body of the drum vault, subject to young uniform, good anti-burst performance.
2, will not be limited by the application of pneumatic valve standards, less spare parts, easy maintenance, reliable operation. The air compressed single pulse ash removal disadvantages. The locking effect of large spacing, can choose a long dust bag, the use of indoor space, occupying a small area.
3、The use of trapezoidal flat bags in the body layout of the drum, the structure is simple, compact, enhance the use of dust bag period.
Pulverizer bag dust collection equipment uses centrifugal fan to create air pressure area at the dust sealing cover, which will suck the dust into the dust collector equipment, single pulse bag dust collector set up under the dust collector bag, the dust vapor according to the dust bag, the dust is blocked and separated out, and the clean vapor is then discharged through the centrifugal fan. Dust bag surface soot with pulse solenoid valve gas generator, so that it falls down dust bag, air compression blowing by PLC automatic control system, without human manipulation, it is one of its characteristics. The single pulse bag type dust collector is not only used in crushing, but also used for dust management in various manufacturing industries, and it has obtained very good actual effect of dust removal, and thoroughly achieved the design scheme, which is the ideal dust collector equipment at this stage.

Next Article —

Back